For profile tanks.

1/16" x 3/8" x 2" Aluminum Plate

Price per pair

1/8" x 3/8" x 2" Aluminum Motor Pad

Price per pair

1/8" x 1/2" x 2" Aluminum Motor Pad

Price per pair

Developed by the Russians in the 60’s, this hardware allows both halves of the wings to be separated from the fuselage. The wing panels are held on by joiners which go through the fuselage. Each wing panel is held on by three 4-40 bolts which are accessed through small slots in the wing. It is especially convenient for piped ships in that the pipe does not have to be removed to remove the wing. The same hardware could be used to separate the fuselage into two halves.

1/8 x 3"

Includes Leadouts

1/8 x 3.5"

Includes Leadouts

1/8 x 4"

Includes Leadouts

3/16 x 4"

Includes Leadouts

This is a 4" bellcrank that is based on drawings from Brett Buck of the bellcrank he has been using for several years. The core is a lamination of aluminum and balsa, resulting in a ver light core weighing only 6 grams. It is also very thin and flat. The ball link is attached by drilling and tapping at your preferred throw length.